BWT-150


Closed System Treatment

Complete Corrosion Protection:
A Combination of inhibitors protects both ferrous and non ferrous metals.

Non-Polluting:
Does not contain phosphates, chromates or other heavy metals.

Energy Saving:
Removes and prevents corrosion and scale deposits that reduces heat transfer.

Application:
BWT-150 is a highly effective borate-nitrite corrosion inhibitor system. An organic copper alloy corrosion inhibitor gives superior results when compared to other treatments. A dispersant prevents deposits from forming and removes light to medium rust and deposits already in the system. This provides optimum heat transfer and efficiency. BWT-150 may be used for protection of hot loops and chilled loops. It is compatible with glycol heat transfer fluid.

Dosage and Testing:
A sufficient amount of BWT-150 depends on the water capacity of the system. Add 4 gallons of BWT-150 for each 1000 gallons of water in the system. A nitrite residual of 800-1200 is required for proper protection. Your representative will recommend the proper dosage for your system and operating conditions.

Feeding:
Add the required quantity of BWT-150 to the system using a by-pass shot feeder, or a chemical pump. The feeder or pump can be installed any convenient an accessible location in the system.

Service:
Regular service calls will be made by your representative. All recommendations and adjustments for correct use will be discussed with operating personnel at this time.

Packaging:
5 Gallon Pails
30 Gallon Drums
55 Gallon Drums
Totes